AOC 2.0 Oil Cooler (Direct Mount)
Extend the Life of your Hydraulic Elevator System!
Avoid hot oil problems like nuisance shutdowns, leveling problem and oil odor by installing the MEI - AOC 2.0 Oil Cooler.
Designed for direct mounting to the power unit in climate-controlled environments where stable room temperatures are maintained.
Benefits
- Lowers oil temperature by 40°F
- Smoother stops and starts
- Integrated oil filter
- Extended component life
- Fewer shutdowns
- Overall performance improvement
- Direct mount to power unit
Recommended Applications
- Twin jack holeless applications with two- or three-stage telescopic jacks
- Heavily used single-stage twin jack holeless projects
- Roped hydraulic applications with moderate usage and travel exceeding 25 feet
- Any hydraulic elevator with high usage
How It Works
The Oil Cooler is mounted to the power unit. When the oil temperature in the reservoir reaches a preset limit, it is circulated through the radiator. This process reduces the oil temperature by nearly 40°F, depending on site conditions. The oil is also filtered as it runs through the system, which results in enhanced performance and extended component life.
Specifications
- Dimensions: 18" x 20" x 24"
- Weight: 67 lbs
- Heat removal: 21,300 BTU/hr
- Circulation Rate: 12.7 GPM
- Decibels: 69 db
- Max Pressure: 87 PSI
- Electrical: 115 or 208 VAC
- Filter: 10 micron
- External Airflow: 1266 CFM
- Motor: 1 HP, 115 VAC, 1 phase, 9.61 Amp motor Or 1 HP, 208-220 VAC, 1 phase, 5.20 Amp motor
- Includes all hardware for mounting and instructions for installation
